I2C FACE ID V8 PROGRAMMER FIXTURE FOR IPHONE models

Details

Product Details:-

Item: I2C FACE ID V8 PROGRAMMER FIXTURE FOR IPHONE X/XS/XSMAX/XR/11/11PRO/11PROMAX/12/12PRO/12MINI/12PROMAX

Condition: New

Compatible Brand: For iPhone

Type: PROGRAMMER

Notice:

1: The flex cable can only be used with the IFace V8 programmer;

2: The flex cable cannot be used separately;

3: If there is no programmer, the flex cable can not be used.

Iface V8 Programmer Fix iPhone Face ID Not working on X-11 pro max, Face ID Repair Tool - Iface Pro V8 Programmer, don't need to disassemble & Reballing the encrypted chip, just replace the dot matrix cable, repair iPhone Face ID issues no working.

I2C FACE ID V8 PROGRAMMER Features:

Offline read & write
Support models: For iPhone X/XR/XS/XS Max/11/11 Pro/11 Pro Max/12/12Pro/12Mini/12ProMax
Support Chinese & English menu switch
Non-trace repair, green pass the 3UTools
Chip non-removal low repair risk
Low power consumption and no current leakage
Can be adapted to the latest iOS system perfectly

Operation Process

Connect with the original flex cable, press the ‘Test’ button to test the flex cable condition
Press the ‘Read’ button to read and save the data (Do not power off during the operation process to avoid loss of data )
Connect the i2C dot projector flex cable with the host machine, then press the ‘Write’ button to write the data. (Do not power off during the operation process to avoid loss of data)
Cut off the shielding cover soldering joint pads with grinding pen
Heat with a hot air gun and separate the dot projector board from the glass lens with a sculpture knife
Take down the MOSFET then short the pin as shown in the figure
Reball the pads on the flex cable
Apply solder paste then solder the dot projector board to the flex cable
Test the flex cable working condition after the soldering
Put the flex cable into the shielding cover and keep the flex well aligned with the glass lens

Model: